GENERAL DESCRIPTION 

The Magnaflux Portable Power Packs are convenient and economical inspection units that are used in a wide range of magnetic particle applications that require only moderate power. They are ideal for large or heavy parts, in-service mobile equipment or job-site welds. 

BENEFITS 

• Find surface defects with AC current; switch cable connection to half wave DC (HWDC) for nearsurface flaws 

• Locate defects in any direction using prods, central conductor, coil (wrap part with 3-5 turns of cable) 

• Infinitely variable current control 

• Demagnetize your parts in AC mode by slowly turning the current dial to zero 

• Built-in automatic-reset circuit breaker 

• May be used as the main power source for the Magnaflux MAG Kit modular bench inspection system 

SPECIFICATIONS 

• Length: 22" (55.9 cm) 

• Width: 9.5" (24.1 cm) 

• Height: 9.5" (24.1 cm) 

• Maximum Output*: 1500 amps, AC or HWDC 

• Current Input Single Phase: 230/460 Volts, 50/60 Hz, single phase power 

• Line Current: 42 amps @ 230 VAC; 21 amps @ 460 VAC 

• Maximum Duty Cycle: 2 minutes ON, 2 minutes OFF 

• Unit Weight: 93 lbs. (42.2 kg) Note:  Current ratings are based on the use of two 15-foot length of 4/0 Cable 

ACCESSORIES AND CABLES FOR START-UP 

• Cable 4/0, 15 ft. with either ends at both ends (Part Number 11308) 

• Remote palm button cable, 15 ft. (Part Number 169621) 

Product Data Sheet